HOME   PRODUCTS PRODUCTS

KSB-600A Automatic Headlight Tester

GENERAL INTRODUCTION

KSB-600A Headlight Tester is applied as an automatic measuring device for inspecting automobile headlamps. Its testing ability covers high beam luminous intensity, high beam offset; low beam offset; headlamp benchmark center height etc. The device meet the national standard GB7258, GB 21861, GB18565 and other related technical requirements by vehicle testing organizations. This device is largely used in vehicle testlines, vehicle repairing shops, and automobile manufactories etc.

 

FEATURES

· State-of-art appearance design, high-speed DSP6000 image processing technology, automaticly searching for headlamp high beam, accurate detection for low beam;
· Dual CCD technology, independent testing, allow to adjust automobile headlamp low beam;
· Multi-point auxiliary light searching system, special CCD light searching to speed up the inspection;
· Double positioning system effectively prevent interference;
· Standard RS232 interface, reliable networking software and rich communication instruction;
· Bright digital display system;
· Online adjustment mode;
· Dual-lamp inspection mode available to shortern inspection speed.


MAIN SPECIFICATIONS

1.Environmental Conditions:
            Temperature: -5°C ~ 40°C
            Relative Humidity: ≤90%
            Power supply: AC220V ± 10%,50±1Hz

2.Measurement Range:
     Luminous Intensity:0 - 120.000
     Optical Axis Offset:
                                   High Beam: Vertical: (Up)400mm/10m ~ (Down)560mm/10m
                                                          Horizontal: (Left)560mm/10m ~(Right)560mm/10m
                                   Low Beam: Vertical: (Up)400mm/10m ~ (Down)560mm/10m
                                                          Horizontal: (Left)560mm/10m ~(Right)560mm/10m
     Elevation of Light:350 ~1400(mm)

     Deviation Left and Right Beam: 3°

3.Indicating Value Error:
      Luminous Intensity:  ± 10%
      Optical Axis Offset:   ± 32mm/10m
      Central Height of Photovoltaic Box:  ±10mm

4.Measuring Distance: 1m

5.Length of the guide rail: 5m

6.Power Consumption: 200W

7.Weight: 100kg

8.Dimensions: 800mm (Length)×670mm(Width)×1700mm (Height)